Marine Engine Boat Instrument Panel. P re wired USA Made.
Panel Material: marine Acrylic, poly carbonate, marine Plexiglas. Dimensions: 12" X 6.625". White Panel With White Gauges. Fog resistant Marine Grade Gauges.
4000 RPM Programmable Tachometer with Digital Hour Meter 7 Character LCD Display. Engine Coolant Water Temp Gauge 120-240°F/ 40-120°C. Engine Oil Pressure Gauge 0-80 psi/0-5 bar. 12 V Voltmeter Gauge (24 Volt available). Fuel Level Gauge E-F 240-33 ohms.Fully Wired Instrument Panel with 5 Marine Grade Gauges. Oil Pressure Sender 80 PSI. Please confirm thread size (Other threads available, please call for details).
(3/8 or 1/2) please confirm thread size. RPM Sender signal generator (cam shaft sending unit) or magnetic sender.
Cole Hersee Sealed Ignition Key Switch. Fully sealed contact area using O-rings and ultrasonic welding. Integrated Sealed Deutsch Connector Interface. Anti-restart and spring return options available. Tested to SAE J259 for ignition switches.
Supplied with two matching keys, with or without boot. Custom logo can be molded on the boot. Multiple key codes or keyed alike available.
Key is removable only at the'Off' position. An extensive series of ignition switches that can also be used as rotary switches. Suitable for a broad range of voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC.Made of rugged engineering grade plastic, these switches stand up to mechanical shock and vibration, and will not corrode or rust. This switch has an integrated Deutsch-type socket to make electrical connection quick and easy, and to exclude moisture and dust. UL-tested and recognized to SAE J259 for ignition switches. Contacts are sealed front and back to IP67 (with connector installed). Many options available with regard to position, spring return, key boot style and marking, actuator interface and length, and anti-restart features. Marine Grade Wire & Features. USCG / NMEA specification Copper tinned wire.
Flexible cable water and oil resistant. Pigtail Harness connected to 12 position terminal strip. 12 Circuit 30 Amp Terminal Strip. Closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit.Jumpers allow creation of common circuits. Marine grade push button switch (Engine Stop, or Pre-heat, or both if need it). Engraved with Engine Name (optional your boat Name). #Note Always you can choose between. All panels are made in the USA by AC DC Marine Inc. Item(s) must be in original unused condition, and all tags, cards, boxes, and/or pouches must be included with your return. Return processing begins after customer's package is delivered to us. This item is in the category "eBay Motors\Parts & Accessories\Boat Parts\Inboard Engines & Components\Other". The seller is "acdcmarineinc" and is located in this country: US. This item can be shipped worldwide.